Isolators - Vibration Isolators

	Vibration Isolators
	TRM Rubber In Shear Mounts TRH Rubber In Shear Hangers TSO Open Restrained Isolators TSC Closed Mount Isolators TSR Totally Retained Isolators TSH Spring Hangers
	Excessive vibration can cause premature failure of machinery, structural fatiguing of supports, and increased noise. The pro per selection and application of vibration isolation can eliminate virtually all of the vibration generated by a piece of equipment. With J. P. America Inc. isolators, mounts, and hangers coupled together with our custom designed isolation bases, equipment can be located in vibration sensitive areas not otherwise possible. J. P. America Inc. has established itself as a supplier of highly engineered silencing and isolation products for industry. We offer standard isolator designs, distinct series types, and numerous sizes to meet your vibration isolation needs. All are designed for the maximum possible economy. Complete information on each type and series can be found on J. P. data sheets. Our corporate philosophy of providing our customers with the service they expect and the products they need, is guaranteed for each isolator, mount, and hanger manufactured.
	TRM Rubber In Shear Mounts: offer the most economical means of isolating floor mounted equipment and are ideal for situations where high frequency vibration is the problem. Steel equipment hold down nut and base plate (with mount bolt-down holes) are totally encapsulated in rubber.
	TRH Rubber In Shear Hangers: represent the lowest cost alternative for isolating ceiling suspended equipment. Designed for high frequency applications, the Type TRH hanger, of bonded neoprene, is mounted in a welded plate steel housing complete with upper and lower rod mounting holes.
	TSO Open Restrained Isolators: for floor mounting, are supplied with completely stable steel spring welded in place, drilled mild steel mounting plate, acoustical pad, and external leveling bolt. TSO isolators can effectively handle lateral forces up to 25% of rated vertical capacity.
	TSC Closed Mount Isolators: are supplied complete with a spring(s), two piece cast housing, horizontal stabilizers, acoustical pad, and external leveling bolt. Use TSC isolators in floor mounted situations when lateral motion must be limited in the presence of high horizontal forces.
	TSR Totally Retained Isolator For floor mounted applications where both vertical and lateral motion must be limited due to varying static load. Each TSR isolator comes with a spring(s), drilled welded steel housing and top plate, acoustical pad, vertical limit adjusting hardware,a nd leveling bolt.
	TSH Spring Hangers: for the isolation of ceiling suspended equipment. Type TSH hangers are supplied with a spring, welded plate steel housing with spring retainer, upper and lower rod mounting holes, and heavy duty rubber washers to prevent high frequency flanking.
	Accessories and Special Isolation Designs: Isolator mounting brackets (with height reducing feature & full load lifting bars when, requested) Type BRC, BWS, BCI, and BSI isolation rails, channels and bases (refer to Bulletin B1-88) Special paint finishes and coatings as well as neoprene coated weatherproof springs Custom, seismic, special duty, and high capacity vibration isolation Three Step Selection First: Choose appropriate isolation type and static deflection for the application. Refer Applications Chart this bulletin. Second: Confirm that isolation efficiency is adequate. In crease static deflection, if necessary. Refer Isolation Efficiency Graph. Third: Refer to J. P. Environmental data sheets for dimensions.

	Application Chart: Isolation Type And Static Deflection
	Disturbing Frequency

	Contact Us:
	J.P. America Inc. 225 Industrial Drive, Unit 6, Hampshire, IL. USA, 60140 847.683.7067 1.800.445.HUSH (4874) Fax: 847.683.7069 Email: jpa@jpamericainc.com